Query Expressions¶

Query expressions describe a value or a computation that can be used as part of an update, create, filter, order by, annotation, or aggregate. There are a number of built-in expressions (documented below) that can be used to help you write queries. Expressions can be combined, or in some cases nested, to form more complex computations.

Supported arithmetic¶

Django supports negation, addition, subtraction, multiplication, division, modulo arithmetic, and the power operator on query expressions, using Python constants, variables, and even other expressions.

Changed in Django 2.1:

Support for negation was added.

Some examples¶

from django.db.models import Count, F, Value
from django.db.models.functions import Length, Upper

# Find companies that have more employees than chairs.
Company.objects.filter(num_employees__gt=F('num_chairs'))

# Find companies that have at least twice as many employees
# as chairs. Both the querysets below are equivalent.
Company.objects.filter(num_employees__gt=F('num_chairs') * 2)
Company.objects.filter(
    num_employees__gt=F('num_chairs') + F('num_chairs'))

# How many chairs are needed for each company to seat all employees?
>>> company = Company.objects.filter(
...    num_employees__gt=F('num_chairs')).annotate(
...    chairs_needed=F('num_employees') - F('num_chairs')).first()
>>> company.num_employees
120
>>> company.num_chairs
50
>>> company.chairs_needed
70

# Create a new company using expressions.
>>> company = Company.objects.create(name='Google', ticker=Upper(Value('goog')))
# Be sure to refresh it if you need to access the field.
>>> company.refresh_from_db()
>>> company.ticker
'GOOG'

# Annotate models with an aggregated value. Both forms
# below are equivalent.
Company.objects.annotate(num_products=Count('products'))
Company.objects.annotate(num_products=Count(F('products')))

# Aggregates can contain complex computations also
Company.objects.annotate(num_offerings=Count(F('products') + F('services')))

# Expressions can also be used in order_by(), either directly
Company.objects.order_by(Length('name').asc())
Company.objects.order_by(Length('name').desc())
# or using the double underscore lookup syntax.
from django.db.models import CharField
from django.db.models.functions import Length
CharField.register_lookup(Length)
Company.objects.order_by('name__length')

Built-in Expressions¶

Note

These expressions are defined in django.db.models.expressions and django.db.models.aggregates, but for convenience they’re available and usually imported from django.db.models.

`F()` expressions¶

class F[source]¶

An F() object represents the value of a model field or annotated column. It makes it possible to refer to model field values and perform database operations using them without actually having to pull them out of the database into Python memory.

Instead, Django uses the F() object to generate an SQL expression that describes the required operation at the database level.

This is easiest to understand through an example. Normally, one might do something like this:

# Tintin filed a news story!
reporter = Reporters.objects.get(name='Tintin')
reporter.stories_filed += 1
reporter.save()

Here, we have pulled the value of reporter.stories_filed from the database into memory and manipulated it using familiar Python operators, and then saved the object back to the database. But instead we could also have done:

from django.db.models import F

reporter = Reporters.objects.get(name='Tintin')
reporter.stories_filed = F('stories_filed') + 1
reporter.save()

Although reporter.stories_filed = F('stories_filed') + 1 looks like a normal Python assignment of value to an instance attribute, in fact it’s an SQL construct describing an operation on the database.

When Django encounters an instance of F(), it overrides the standard Python operators to create an encapsulated SQL expression; in this case, one which instructs the database to increment the database field represented by reporter.stories_filed.

Whatever value is or was on reporter.stories_filed, Python never gets to know about it - it is dealt with entirely by the database. All Python does, through Django’s F() class, is create the SQL syntax to refer to the field and describe the operation.

To access the new value saved this way, the object must be reloaded:

reporter = Reporters.objects.get(pk=reporter.pk)
# Or, more succinctly:
reporter.refresh_from_db()

As well as being used in operations on single instances as above, F() can be used on QuerySets of object instances, with update(). This reduces the two queries we were using above - the get() and the save() - to just one:

reporter = Reporters.objects.filter(name='Tintin')
reporter.update(stories_filed=F('stories_filed') + 1)

We can also use update() to increment the field value on multiple objects - which could be very much faster than pulling them all into Python from the database, looping over them, incrementing the field value of each one, and saving each one back to the database:

Reporter.objects.all().update(stories_filed=F('stories_filed') + 1)

F() therefore can offer performance advantages by:

getting the database, rather than Python, to do work
reducing the number of queries some operations require

Avoiding race conditions using `F()`¶

Another useful benefit of F() is that having the database - rather than Python - update a field’s value avoids a race condition.

If two Python threads execute the code in the first example above, one thread could retrieve, increment, and save a field’s value after the other has retrieved it from the database. The value that the second thread saves will be based on the original value; the work of the first thread will simply be lost.

If the database is responsible for updating the field, the process is more robust: it will only ever update the field based on the value of the field in the database when the save() or update() is executed, rather than based on its value when the instance was retrieved.

`F()` assignments persist after `Model.save()`¶

F() objects assigned to model fields persist after saving the model instance and will be applied on each save(). For example:

reporter = Reporters.objects.get(name='Tintin')
reporter.stories_filed = F('stories_filed') + 1
reporter.save()

reporter.name = 'Tintin Jr.'
reporter.save()

stories_filed will be updated twice in this case. If it’s initially 1, the final value will be 3. This persistence can be avoided by reloading the model object after saving it, for example, by using refresh_from_db().

Using `F()` in filters¶

F() is also very useful in QuerySet filters, where they make it possible to filter a set of objects against criteria based on their field values, rather than on Python values.

This is documented in using F() expressions in queries.

Using `F()` with annotations¶

F() can be used to create dynamic fields on your models by combining different fields with arithmetic:

company = Company.objects.annotate(
    chairs_needed=F('num_employees') - F('num_chairs'))

If the fields that you’re combining are of different types you’ll need to tell Django what kind of field will be returned. Since F() does not directly support output_field you will need to wrap the expression with ExpressionWrapper:

from django.db.models import DateTimeField, ExpressionWrapper, F

Ticket.objects.annotate(
    expires=ExpressionWrapper(
        F('active_at') + F('duration'), output_field=DateTimeField()))

When referencing relational fields such as ForeignKey, F() returns the primary key value rather than a model instance:

>> car = Company.objects.annotate(built_by=F('manufacturer'))[0]
>> car.manufacturer
<Manufacturer: Toyota>
>> car.built_by
3

Using `F()` to sort null values¶

Use F() and the nulls_first or nulls_last keyword argument to Expression.asc() or desc() to control the ordering of a field’s null values. By default, the ordering depends on your database.

For example, to sort companies that haven’t been contacted (last_contacted is null) after companies that have been contacted:

from django.db.models import F
Company.object.order_by(F('last_contacted').desc(nulls_last=True))

`Func()` expressions¶

Func() expressions are the base type of all expressions that involve database functions like COALESCE and LOWER, or aggregates like SUM. They can be used directly:

from django.db.models import F, Func

queryset.annotate(field_lower=Func(F('field'), function='LOWER'))

or they can be used to build a library of database functions:

class Lower(Func):
    function = 'LOWER'

queryset.annotate(field_lower=Lower('field'))

But both cases will result in a queryset where each model is annotated with an extra attribute field_lower produced, roughly, from the following SQL:

SELECT
    ...
    LOWER("db_table"."field") as "field_lower"

See Database Functions for a list of built-in database functions.

The Func API is as follows:

class Func(*expressions, **extra)[source]¶

function¶: A class attribute describing the function that will be generated. Specifically, the function will be interpolated as the function placeholder within template. Defaults to None.

template¶

A class attribute, as a format string, that describes the SQL that is generated for this function. Defaults to '%(function)s(%(expressions)s)'.

If you’re constructing SQL like strftime('%W', 'date') and need a literal % character in the query, quadruple it (%%%%) in the template attribute because the string is interpolated twice: once during the template interpolation in as_sql() and once in the SQL interpolation with the query parameters in the database cursor.

arg_joiner¶: A class attribute that denotes the character used to join the list of expressions together. Defaults to ', '.

arity¶: A class attribute that denotes the number of arguments the function accepts. If this attribute is set and the function is called with a different number of expressions, TypeError will be raised. Defaults to None.

as_sql(compiler, connection, function=None, template=None, arg_joiner=None, **extra_context)[source]¶

Generates the SQL for the database function.

The as_vendor() methods should use the function, template, arg_joiner, and any other **extra_context parameters to customize the SQL as needed. For example:

django/db/models/functions.py¶

class ConcatPair(Func):
    ...
    function = 'CONCAT'
    ...

    def as_mysql(self, compiler, connection, **extra_context):
        return super().as_sql(
            compiler, connection,
            function='CONCAT_WS',
            template="%(function)s('', %(expressions)s)",
            **extra_context
        )

To avoid a SQL injection vulnerability, extra_context must not contain untrusted user input as these values are interpolated into the SQL string rather than passed as query parameters, where the database driver would escape them.

The *expressions argument is a list of positional expressions that the function will be applied to. The expressions will be converted to strings, joined together with arg_joiner, and then interpolated into the template as the expressions placeholder.

Positional arguments can be expressions or Python values. Strings are assumed to be column references and will be wrapped in F() expressions while other values will be wrapped in Value() expressions.

The **extra kwargs are key=value pairs that can be interpolated into the template attribute. To avoid a SQL injection vulnerability, extra must not contain untrusted user input as these values are interpolated into the SQL string rather than passed as query parameters, where the database driver would escape them.

The function, template, and arg_joiner keywords can be used to replace the attributes of the same name without having to define your own class. output_field can be used to define the expected return type.

`Aggregate()` expressions¶

An aggregate expression is a special case of a Func() expression that informs the query that a GROUP BY clause is required. All of the aggregate functions, like Sum() and Count(), inherit from Aggregate().

Since Aggregates are expressions and wrap expressions, you can represent some complex computations:

from django.db.models import Count

Company.objects.annotate(
    managers_required=(Count('num_employees') / 4) + Count('num_managers'))

The Aggregate API is as follows:

class Aggregate(*expressions, output_field=None, distinct=False, filter=None, **extra)[source]¶

template¶: A class attribute, as a format string, that describes the SQL that is generated for this aggregate. Defaults to '%(function)s(%(distinct)s%(expressions)s)'.

function¶: A class attribute describing the aggregate function that will be generated. Specifically, the function will be interpolated as the function placeholder within template. Defaults to None.

window_compatible¶: Defaults to True since most aggregate functions can be used as the source expression in Window.

allow_distinct¶: New in Django 2.2.

A class attribute determining whether or not this aggregate function allows passing a distinct keyword argument. If set to False (default), TypeError is raised if distinct=True is passed.

The expressions positional arguments can include expressions or the names of model fields. They will be converted to a string and used as the expressions placeholder within the template.

The output_field argument requires a model field instance, like IntegerField() or BooleanField(), into which Django will load the value after it’s retrieved from the database. Usually no arguments are needed when instantiating the model field as any arguments relating to data validation (max_length, max_digits, etc.) will not be enforced on the expression’s output value.

Note that output_field is only required when Django is unable to determine what field type the result should be. Complex expressions that mix field types should define the desired output_field. For example, adding an IntegerField() and a FloatField() together should probably have output_field=FloatField() defined.

The distinct argument determines whether or not the aggregate function should be invoked for each distinct value of expressions (or set of values, for multiple expressions). The argument is only supported on aggregates that have allow_distinct set to True.

The filter argument takes a Q object that’s used to filter the rows that are aggregated. See Conditional aggregation and Filtering on annotations for example usage.

The **extra kwargs are key=value pairs that can be interpolated into the template attribute.

New in Django 2.2:

The allow_distinct attribute and distinct argument were added.

Creating your own Aggregate Functions¶

Creating your own aggregate is extremely easy. At a minimum, you need to define function, but you can also completely customize the SQL that is generated. Here’s a brief example:

from django.db.models import Aggregate

class Sum(Aggregate):
    # Supports SUM(ALL field).
    function = 'SUM'
    template = '%(function)s(%(all_values)s%(expressions)s)'
    allow_distinct = False

    def __init__(self, expression, all_values=False, **extra):
        super().__init__(
            expression,
            all_values='ALL ' if all_values else '',
            **extra
        )

`Value()` expressions¶

class Value(value, output_field=None)[source]¶

A Value() object represents the smallest possible component of an expression: a simple value. When you need to represent the value of an integer, boolean, or string within an expression, you can wrap that value within a Value().

You will rarely need to use Value() directly. When you write the expression F('field') + 1, Django implicitly wraps the 1 in a Value(), allowing simple values to be used in more complex expressions. You will need to use Value() when you want to pass a string to an expression. Most expressions interpret a string argument as the name of a field, like Lower('name').

The value argument describes the value to be included in the expression, such as 1, True, or None. Django knows how to convert these Python values into their corresponding database type.

The output_field argument should be a model field instance, like IntegerField() or BooleanField(), into which Django will load the value after it’s retrieved from the database. Usually no arguments are needed when instantiating the model field as any arguments relating to data validation (max_length, max_digits, etc.) will not be enforced on the expression’s output value.

`ExpressionWrapper()` expressions¶

class ExpressionWrapper(expression, output_field)[source]¶

ExpressionWrapper simply surrounds another expression and provides access to properties, such as output_field, that may not be available on other expressions. ExpressionWrapper is necessary when using arithmetic on F() expressions with different types as described in Using F() with annotations.

Conditional expressions¶

Conditional expressions allow you to use if … elif … else logic in queries. Django natively supports SQL CASE expressions. For more details see Conditional Expressions.

`Subquery()` expressions¶

class Subquery(queryset, output_field=None)[source]¶

You can add an explicit subquery to a QuerySet using the Subquery expression.

For example, to annotate each post with the email address of the author of the newest comment on that post:

>>> from django.db.models import OuterRef, Subquery
>>> newest = Comment.objects.filter(post=OuterRef('pk')).order_by('-created_at')
>>> Post.objects.annotate(newest_commenter_email=Subquery(newest.values('email')[:1]))

On PostgreSQL, the SQL looks like:

SELECT "post"."id", (
    SELECT U0."email"
    FROM "comment" U0
    WHERE U0."post_id" = ("post"."id")
    ORDER BY U0."created_at" DESC LIMIT 1
) AS "newest_commenter_email" FROM "post"

Note

The examples in this section are designed to show how to force Django to execute a subquery. In some cases it may be possible to write an equivalent queryset that performs the same task more clearly or efficiently.

Referencing columns from the outer queryset¶

class OuterRef(field)[source]¶

Use OuterRef when a queryset in a Subquery needs to refer to a field from the outer query. It acts like an F expression except that the check to see if it refers to a valid field isn’t made until the outer queryset is resolved.

Instances of OuterRef may be used in conjunction with nested instances of Subquery to refer to a containing queryset that isn’t the immediate parent. For example, this queryset would need to be within a nested pair of Subquery instances to resolve correctly:

>>> Book.objects.filter(author=OuterRef(OuterRef('pk')))

Limiting a subquery to a single column¶

There are times when a single column must be returned from a Subquery, for instance, to use a Subquery as the target of an __in lookup. To return all comments for posts published within the last day:

>>> from datetime import timedelta
>>> from django.utils import timezone
>>> one_day_ago = timezone.now() - timedelta(days=1)
>>> posts = Post.objects.filter(published_at__gte=one_day_ago)
>>> Comment.objects.filter(post__in=Subquery(posts.values('pk')))

In this case, the subquery must use values() to return only a single column: the primary key of the post.

Limiting the subquery to a single row¶

To prevent a subquery from returning multiple rows, a slice ([:1]) of the queryset is used:

>>> subquery = Subquery(newest.values('email')[:1])
>>> Post.objects.annotate(newest_commenter_email=subquery)

In this case, the subquery must only return a single column and a single row: the email address of the most recently created comment.

(Using get() instead of a slice would fail because the OuterRef cannot be resolved until the queryset is used within a Subquery.)

`Exists()` subqueries¶

class Exists(queryset)[source]¶

Exists is a Subquery subclass that uses an SQL EXISTS statement. In many cases it will perform better than a subquery since the database is able to stop evaluation of the subquery when a first matching row is found.

For example, to annotate each post with whether or not it has a comment from within the last day:

>>> from django.db.models import Exists, OuterRef
>>> from datetime import timedelta
>>> from django.utils import timezone
>>> one_day_ago = timezone.now() - timedelta(days=1)
>>> recent_comments = Comment.objects.filter(
...     post=OuterRef('pk'),
...     created_at__gte=one_day_ago,
... )
>>> Post.objects.annotate(recent_comment=Exists(recent_comments))

On PostgreSQL, the SQL looks like:

SELECT "post"."id", "post"."published_at", EXISTS(
    SELECT U0."id", U0."post_id", U0."email", U0."created_at"
    FROM "comment" U0
    WHERE (
        U0."created_at" >= YYYY-MM-DD HH:MM:SS AND
        U0."post_id" = ("post"."id")
    )
) AS "recent_comment" FROM "post"

It’s unnecessary to force Exists to refer to a single column, since the columns are discarded and a boolean result is returned. Similarly, since ordering is unimportant within an SQL EXISTS subquery and would only degrade performance, it’s automatically removed.

You can query using NOT EXISTS with ~Exists().

Filtering on a `Subquery` expression¶

It’s not possible to filter directly using Subquery and Exists, e.g.:

>>> Post.objects.filter(Exists(recent_comments))
...
TypeError: 'Exists' object is not iterable

You must filter on a subquery expression by first annotating the queryset and then filtering based on that annotation:

>>> Post.objects.annotate(
...     recent_comment=Exists(recent_comments),
... ).filter(recent_comment=True)

Using aggregates within a `Subquery` expression¶

Aggregates may be used within a Subquery, but they require a specific combination of filter(), values(), and annotate() to get the subquery grouping correct.

Assuming both models have a length field, to find posts where the post length is greater than the total length of all combined comments:

>>> from django.db.models import OuterRef, Subquery, Sum
>>> comments = Comment.objects.filter(post=OuterRef('pk')).order_by().values('post')
>>> total_comments = comments.annotate(total=Sum('length')).values('total')
>>> Post.objects.filter(length__gt=Subquery(total_comments))

The initial filter(...) limits the subquery to the relevant parameters. order_by() removes the default ordering (if any) on the Comment model. values('post') aggregates comments by Post. Finally, annotate(...) performs the aggregation. The order in which these queryset methods are applied is important. In this case, since the subquery must be limited to a single column, values('total') is required.

This is the only way to perform an aggregation within a Subquery, as using aggregate() attempts to evaluate the queryset (and if there is an OuterRef, this will not be possible to resolve).

Raw SQL expressions¶

class RawSQL(sql, params, output_field=None)[source]¶

Sometimes database expressions can’t easily express a complex WHERE clause. In these edge cases, use the RawSQL expression. For example:

>>> from django.db.models.expressions import RawSQL
>>> queryset.annotate(val=RawSQL("select col from sometable where othercol = %s", (someparam,)))

These extra lookups may not be portable to different database engines (because you’re explicitly writing SQL code) and violate the DRY principle, so you should avoid them if possible.

Warning

To protect against SQL injection attacks, you must escape any parameters that the user can control by using params. params is a required argument to force you to acknowledge that you’re not interpolating your SQL with user-provided data.

You also must not quote placeholders in the SQL string. This example is vulnerable to SQL injection because of the quotes around %s:

RawSQL("select col from sometable where othercol = '%s'")  # unsafe!

You can read more about how Django’s SQL injection protection works.

Window functions¶

Window functions provide a way to apply functions on partitions. Unlike a normal aggregation function which computes a final result for each set defined by the group by, window functions operate on frames and partitions, and compute the result for each row.

You can specify multiple windows in the same query which in Django ORM would be equivalent to including multiple expressions in a QuerySet.annotate() call. The ORM doesn’t make use of named windows, instead they are part of the selected columns.

class Window(expression, partition_by=None, order_by=None, frame=None, output_field=None)[source]¶

filterable¶: Defaults to False. The SQL standard disallows referencing window functions in the WHERE clause and Django raises an exception when constructing a QuerySet that would do that.

template¶: Defaults to %(expression)s OVER (%(window)s)'. If only the expression argument is provided, the window clause will be blank.

The Window class is the main expression for an OVER clause.

The expression argument is either a window function, an aggregate function, or an expression that’s compatible in a window clause.

The partition_by argument is a list of expressions (column names should be wrapped in an F-object) that control the partitioning of the rows. Partitioning narrows which rows are used to compute the result set.

The output_field is specified either as an argument or by the expression.

The order_by argument accepts a sequence of expressions on which you can call asc() and desc(). The ordering controls the order in which the expression is applied. For example, if you sum over the rows in a partition, the first result is just the value of the first row, the second is the sum of first and second row.

The frame parameter specifies which other rows that should be used in the computation. See Frames for details.

For example, to annotate each movie with the average rating for the movies by the same studio in the same genre and release year:

>>> from django.db.models import Avg, F, Window
>>> from django.db.models.functions import ExtractYear
>>> Movie.objects.annotate(
>>>     avg_rating=Window(
>>>         expression=Avg('rating'),
>>>         partition_by=[F('studio'), F('genre')],
>>>         order_by=ExtractYear('released').asc(),
>>>     ),
>>> )

This makes it easy to check if a movie is rated better or worse than its peers.

You may want to apply multiple expressions over the same window, i.e., the same partition and frame. For example, you could modify the previous example to also include the best and worst rating in each movie’s group (same studio, genre, and release year) by using three window functions in the same query. The partition and ordering from the previous example is extracted into a dictionary to reduce repetition:

>>> from django.db.models import Avg, F, Max, Min, Window
>>> from django.db.models.functions import ExtractYear
>>> window = {
>>>    'partition_by': [F('studio'), F('genre')],
>>>    'order_by': ExtractYear('released').asc(),
>>> }
>>> Movie.objects.annotate(
>>>     avg_rating=Window(
>>>         expression=Avg('rating'), **window,
>>>     ),
>>>     best=Window(
>>>         expression=Max('rating'), **window,
>>>     ),
>>>     worst=Window(
>>>         expression=Min('rating'), **window,
>>>     ),
>>> )

Among Django’s built-in database backends, MySQL 8.0.2+, PostgreSQL, and Oracle support window expressions. Support for different window expression features varies among the different databases. For example, the options in asc() and desc() may not be supported. Consult the documentation for your database as needed.

Frames¶

For a window frame, you can choose either a range-based sequence of rows or an ordinary sequence of rows.

class ValueRange(start=None, end=None)[source]¶

frame_type¶: This attribute is set to 'RANGE'.

PostgreSQL has limited support for ValueRange and only supports use of the standard start and end points, such as CURRENT ROW and UNBOUNDED FOLLOWING.

class RowRange(start=None, end=None)[source]¶

frame_type¶: This attribute is set to 'ROWS'.

Both classes return SQL with the template:

%(frame_type)s BETWEEN %(start)s AND %(end)s

Frames narrow the rows that are used for computing the result. They shift from some start point to some specified end point. Frames can be used with and without partitions, but it’s often a good idea to specify an ordering of the window to ensure a deterministic result. In a frame, a peer in a frame is a row with an equivalent value, or all rows if an ordering clause isn’t present.

The default starting point for a frame is UNBOUNDED PRECEDING which is the first row of the partition. The end point is always explicitly included in the SQL generated by the ORM and is by default UNBOUNDED FOLLOWING. The default frame includes all rows from the partition to the last row in the set.

The accepted values for the start and end arguments are None, an integer, or zero. A negative integer for start results in N preceding, while None yields UNBOUNDED PRECEDING. For both start and end, zero will return CURRENT ROW. Positive integers are accepted for end.

There’s a difference in what CURRENT ROW includes. When specified in ROWS mode, the frame starts or ends with the current row. When specified in RANGE mode, the frame starts or ends at the first or last peer according to the ordering clause. Thus, RANGE CURRENT ROW evaluates the expression for rows which have the same value specified by the ordering. Because the template includes both the start and end points, this may be expressed with:

ValueRange(start=0, end=0)

If a movie’s “peers” are described as movies released by the same studio in the same genre in the same year, this RowRange example annotates each movie with the average rating of a movie’s two prior and two following peers:

>>> from django.db.models import Avg, F, RowRange, Window
>>> from django.db.models.functions import ExtractYear
>>> Movie.objects.annotate(
>>>     avg_rating=Window(
>>>         expression=Avg('rating'),
>>>         partition_by=[F('studio'), F('genre')],
>>>         order_by=ExtractYear('released').asc(),
>>>         frame=RowRange(start=-2, end=2),
>>>     ),
>>> )

If the database supports it, you can specify the start and end points based on values of an expression in the partition. If the released field of the Movie model stores the release month of each movies, this ValueRange example annotates each movie with the average rating of a movie’s peers released between twelve months before and twelve months after the each movie.

>>> from django.db.models import Avg, ExpressionList, F, ValueRange, Window
>>> Movie.objects.annotate(
>>>     avg_rating=Window(
>>>         expression=Avg('rating'),
>>>         partition_by=[F('studio'), F('genre')],
>>>         order_by=F('released').asc(),
>>>         frame=ValueRange(start=-12, end=12),
>>>     ),
>>> )

Technical Information¶

Below you’ll find technical implementation details that may be useful to library authors. The technical API and examples below will help with creating generic query expressions that can extend the built-in functionality that Django provides.

Expression API¶

Query expressions implement the query expression API, but also expose a number of extra methods and attributes listed below. All query expressions must inherit from Expression() or a relevant subclass.

When a query expression wraps another expression, it is responsible for calling the appropriate methods on the wrapped expression.

class Expression[source]¶

contains_aggregate¶: Tells Django that this expression contains an aggregate and that a GROUP BY clause needs to be added to the query.

contains_over_clause¶: Tells Django that this expression contains a Window expression. It’s used, for example, to disallow window function expressions in queries that modify data.

filterable¶: Tells Django that this expression can be referenced in QuerySet.filter(). Defaults to True.

window_compatible¶: Tells Django that this expression can be used as the source expression in Window. Defaults to False.

resolve_expression(query=None, allow_joins=True, reuse=None, summarize=False, for_save=False)¶

Provides the chance to do any pre-processing or validation of the expression before it’s added to the query. resolve_expression() must also be called on any nested expressions. A copy() of self should be returned with any necessary transformations.

query is the backend query implementation.

allow_joins is a boolean that allows or denies the use of joins in the query.

reuse is a set of reusable joins for multi-join scenarios.

summarize is a boolean that, when True, signals that the query being computed is a terminal aggregate query.

for_save is a boolean that, when True, signals that the query being executed is performing a create or update.

get_source_expressions()¶

Returns an ordered list of inner expressions. For example:

>>> Sum(F('foo')).get_source_expressions()
[F('foo')]

set_source_expressions(expressions)¶: Takes a list of expressions and stores them such that get_source_expressions() can return them.

relabeled_clone(change_map)¶

Returns a clone (copy) of self, with any column aliases relabeled. Column aliases are renamed when subqueries are created. relabeled_clone() should also be called on any nested expressions and assigned to the clone.

change_map is a dictionary mapping old aliases to new aliases.

Example:

def relabeled_clone(self, change_map):
    clone = copy.copy(self)
    clone.expression = self.expression.relabeled_clone(change_map)
    return clone

convert_value(value, expression, connection)¶: A hook allowing the expression to coerce value into a more appropriate type.

get_group_by_cols()¶: Responsible for returning the list of columns references by this expression. get_group_by_cols() should be called on any nested expressions. F() objects, in particular, hold a reference to a column.

asc(nulls_first=False, nulls_last=False)¶

Returns the expression ready to be sorted in ascending order.

nulls_first and nulls_last define how null values are sorted. See Using F() to sort null values for example usage.

desc(nulls_first=False, nulls_last=False)¶

Returns the expression ready to be sorted in descending order.

nulls_first and nulls_last define how null values are sorted. See Using F() to sort null values for example usage.

reverse_ordering()¶: Returns self with any modifications required to reverse the sort order within an order_by call. As an example, an expression implementing NULLS LAST would change its value to be NULLS FIRST. Modifications are only required for expressions that implement sort order like OrderBy. This method is called when reverse() is called on a queryset.

Writing your own Query Expressions¶

You can write your own query expression classes that use, and can integrate with, other query expressions. Let’s step through an example by writing an implementation of the COALESCE SQL function, without using the built-in Func() expressions.

The COALESCE SQL function is defined as taking a list of columns or values. It will return the first column or value that isn’t NULL.

We’ll start by defining the template to be used for SQL generation and an __init__() method to set some attributes:

import copy
from django.db.models import Expression

class Coalesce(Expression):
    template = 'COALESCE( %(expressions)s )'

    def __init__(self, expressions, output_field):
      super().__init__(output_field=output_field)
      if len(expressions) < 2:
          raise ValueError('expressions must have at least 2 elements')
      for expression in expressions:
          if not hasattr(expression, 'resolve_expression'):
              raise TypeError('%r is not an Expression' % expression)
      self.expressions = expressions

We do some basic validation on the parameters, including requiring at least 2 columns or values, and ensuring they are expressions. We are requiring output_field here so that Django knows what kind of model field to assign the eventual result to.

Now we implement the pre-processing and validation. Since we do not have any of our own validation at this point, we just delegate to the nested expressions:

def resolve_expression(self, query=None, allow_joins=True, reuse=None, summarize=False, for_save=False):
    c = self.copy()
    c.is_summary = summarize
    for pos, expression in enumerate(self.expressions):
        c.expressions[pos] = expression.resolve_expression(query, allow_joins, reuse, summarize, for_save)
    return c

Next, we write the method responsible for generating the SQL:

def as_sql(self, compiler, connection, template=None):
    sql_expressions, sql_params = [], []
    for expression in self.expressions:
        sql, params = compiler.compile(expression)
        sql_expressions.append(sql)
        sql_params.extend(params)
    template = template or self.template
    data = {'expressions': ','.join(sql_expressions)}
    return template % data, params

def as_oracle(self, compiler, connection):
    """
    Example of vendor specific handling (Oracle in this case).
    Let's make the function name lowercase.
    """
    return self.as_sql(compiler, connection, template='coalesce( %(expressions)s )')

as_sql() methods can support custom keyword arguments, allowing as_vendorname() methods to override data used to generate the SQL string. Using as_sql() keyword arguments for customization is preferable to mutating self within as_vendorname() methods as the latter can lead to errors when running on different database backends. If your class relies on class attributes to define data, consider allowing overrides in your as_sql() method.

We generate the SQL for each of the expressions by using the compiler.compile() method, and join the result together with commas. Then the template is filled out with our data and the SQL and parameters are returned.

We’ve also defined a custom implementation that is specific to the Oracle backend. The as_oracle() function will be called instead of as_sql() if the Oracle backend is in use.

Finally, we implement the rest of the methods that allow our query expression to play nice with other query expressions:

def get_source_expressions(self):
    return self.expressions

def set_source_expressions(self, expressions):
    self.expressions = expressions

Let’s see how it works:

>>> from django.db.models import F, Value, CharField
>>> qs = Company.objects.annotate(
...    tagline=Coalesce([
...        F('motto'),
...        F('ticker_name'),
...        F('description'),
...        Value('No Tagline')
...        ], output_field=CharField()))
>>> for c in qs:
...     print("%s: %s" % (c.name, c.tagline))
...
Google: Do No Evil
Apple: AAPL
Yahoo: Internet Company
Django Software Foundation: No Tagline

Avoiding SQL injection¶

Since a Func’s keyword arguments for __init__() (**extra) and as_sql() (**extra_context) are interpolated into the SQL string rather than passed as query parameters (where the database driver would escape them), they must not contain untrusted user input.

For example, if substring is user-provided, this function is vulnerable to SQL injection:

from django.db.models import Func

class Position(Func):
    function = 'POSITION'
    template = "%(function)s('%(substring)s' in %(expressions)s)"

    def __init__(self, expression, substring):
        # substring=substring is a SQL injection vulnerability!
        super().__init__(expression, substring=substring)

This function generates a SQL string without any parameters. Since substring is passed to super().__init__() as a keyword argument, it’s interpolated into the SQL string before the query is sent to the database.

Here’s a corrected rewrite:

class Position(Func):
    function = 'POSITION'
    arg_joiner = ' IN '

    def __init__(self, expression, substring):
        super().__init__(substring, expression)

With substring instead passed as a positional argument, it’ll be passed as a parameter in the database query.

Adding support in third-party database backends¶

If you’re using a database backend that uses a different SQL syntax for a certain function, you can add support for it by monkey patching a new method onto the function’s class.

Let’s say we’re writing a backend for Microsoft’s SQL Server which uses the SQL LEN instead of LENGTH for the Length function. We’ll monkey patch a new method called as_sqlserver() onto the Length class:

from django.db.models.functions import Length

def sqlserver_length(self, compiler, connection):
    return self.as_sql(compiler, connection, function='LEN')

Length.as_sqlserver = sqlserver_length

You can also customize the SQL using the template parameter of as_sql().

We use as_sqlserver() because django.db.connection.vendor returns sqlserver for the backend.

Third-party backends can register their functions in the top level __init__.py file of the backend package or in a top level expressions.py file (or package) that is imported from the top level __init__.py.

For user projects wishing to patch the backend that they’re using, this code should live in an AppConfig.ready() method.

Django 2.2.18.dev20201102075525 documentation

Query Expressions¶

Supported arithmetic¶

Some examples¶

Built-in Expressions¶

`F()` expressions¶

Avoiding race conditions using `F()`¶

`F()` assignments persist after `Model.save()`¶

Using `F()` in filters¶

Using `F()` with annotations¶

Using `F()` to sort null values¶

`Func()` expressions¶

`Aggregate()` expressions¶

Creating your own Aggregate Functions¶

`Value()` expressions¶

`ExpressionWrapper()` expressions¶

Conditional expressions¶

`Subquery()` expressions¶

Referencing columns from the outer queryset¶

Limiting a subquery to a single column¶

Limiting the subquery to a single row¶

`Exists()` subqueries¶

Filtering on a `Subquery` expression¶

Using aggregates within a `Subquery` expression¶

Raw SQL expressions¶

Window functions¶

Frames¶

Technical Information¶

Expression API¶

Writing your own Query Expressions¶

Avoiding SQL injection¶

Adding support in third-party database backends¶

Table of Contents

Previous topic

Next topic

This Page

Last update:

Django 2.2.18.dev20201102075525 documentation

Query Expressions¶

Supported arithmetic¶

Some examples¶

Built-in Expressions¶

F() expressions¶

Avoiding race conditions using F()¶

F() assignments persist after Model.save()¶

Using F() in filters¶

Using F() with annotations¶

Using F() to sort null values¶

Func() expressions¶

Aggregate() expressions¶

Creating your own Aggregate Functions¶

Value() expressions¶

ExpressionWrapper() expressions¶

Conditional expressions¶

Subquery() expressions¶

Referencing columns from the outer queryset¶

Limiting a subquery to a single column¶

Limiting the subquery to a single row¶

Exists() subqueries¶

Filtering on a Subquery expression¶

Using aggregates within a Subquery expression¶

Raw SQL expressions¶

Window functions¶

Frames¶

Technical Information¶

Expression API¶

Writing your own Query Expressions¶

Avoiding SQL injection¶

Adding support in third-party database backends¶

Last update:

`F()` expressions¶

Avoiding race conditions using `F()`¶

`F()` assignments persist after `Model.save()`¶

Using `F()` in filters¶

Using `F()` with annotations¶

Using `F()` to sort null values¶

`Func()` expressions¶

`Aggregate()` expressions¶

`Value()` expressions¶

`ExpressionWrapper()` expressions¶

`Subquery()` expressions¶

`Exists()` subqueries¶

Filtering on a `Subquery` expression¶

Using aggregates within a `Subquery` expression¶